BME Fizikai Tudományok Doktori Iskola
PhD témajavaslat

A témavezető neve: Czifrus Szabolcs
- tanszéke: Nukleáris Technika Intézet
- beosztása: egyetemi docens
- tudományos fokozata: PhD
- email címe:
A doktori munka készítésénak helye és címe:
BME Nukleáris Technika Intézet
1111 Budapest Műegyetem rakpart 9.
A kidolgozandó feladat címe: Design of Validation Measurements for Reactor Transient Analysis with Multiphysics Codes
A téma rövid leírása, a megoldandó legfontosabb feladatok felsorolása:

The state-of-the art tools for analysing the complex processes of nuclear reactors are the multi-physics codes. The “traditional” approach for investigating transient phenomena was the application of reactor physics/kinetics, thermal-hydraulics and thermal-mechanics code separately. However, neglecting the coupling between the various phenomena may result in significant inaccuracies. The above mentioned multi-physics codes handle these problems in a different way: a single code can model all the relevant groups of phenomena. Most of the available codes, such as the commercial ANSYS system and the open-source GenFoam apply a single finite-volume discretization mesh for solving all of the groups of partial differential equations of reactor physics, thermal-hydraulics and thermal-mechanics.  

The validation of such multi-physics codes is difficult and problematic in many cases. One of the reasons for the problems is that there is only a narrow group of reactor systems which can be applied for validation purposes. Reactors of too low power, such as critical assemblies cannot be used since there are no detectable thermal effects which are essential for the validation. On the other hand, in reactors of too high power it is not normally allowed to perform certain measurements. Quite luckily, the Training Reactor of BME (TR) has many good properties which make this device an almost ideal tool for Multiphysics code validation. Since the international nuclear community is strongly lacking measurements, the results would be of great value. 

The PhD student would perform the following tasks:

  • Study the literature on reactor transient analysis
  • Study the features of different Multiphysics software
  • Study the ability of available Multiphysics software to model different transients of the Training Reactor
  • Investigate the option of using a self-developed Multiphysics code based on the open-source solver OpenFoam for modelling the TR
  • Set up models and perform calculations for various transients of the TR
  • Compare partial results, such as static reactor physics modelling data with those obtained from reference codes (eg. MCNP)
  • Design measuring tools and perform related safety analysis to perform new measurements, such as temperature field, in the reactor core of the TR
  • Study the effect of technological uncertainties occurring in TR on the validation process
  • Design measurements, such as thermal conductivity of the fuel, in order to decrease the effect of uncertainties
  • Analyse the applicability of the validated code system for modelling more complex power reactor systems

There will be opportunities for the PhD student to participate in international collaboration, particularly with EPFL Lausanne. 

A jelentkezővel szemben támasztott elvárások:

Adequate knowledge of reactor physics and thermal hydraulics

Fundamental knowledge of nuclear measurement techniques

Affinity for using computational modelling tools, applying experimental methods 

Good level of English 


Nyilatkozat: A fenti munkahelyen a javasolt témában kutatás feltételei biztosítottak, a téma meghirdetését a munkahelyi vezető jóváhagyta.
Budapesti Műszaki és Gazdaságtudományi Egyetem
Természettudományi Kar
1111 Budapest, Műegyetem rakpart 3. K épület I. em. 18.